Log CAN messages on an SD card
- Log CAN data without using a computer
- Large storage capacity
- Also suitable for long-term logging
- Easy-to-install and robust housing (IP65)
For recording less common errors
Using CANlogger® large numbers of CAN messages can be logged without requiring a connection to a computer. Data is either stored onto an inexpensive SD card which can be read out by an ordinary computer. The cards' large storage capacity enables record largs bus loads, data to be logged long-term so that critical parameters can be monitored and less common errors can be recorded.
Difficult conditions are not a problem
The device's tried and tested housing has been made even better and can be attached in several different ways. Moreover, the housing is also coated in a special layer which protects the CANlogger® from being damaged by corrosion, for example. The model can be made to meet protection class IP65, if required, by adding an optional lid to the SD card insert and to the USB port.
A 32-bit controller with a flash memory makes CANlogger® a high-performance solution. Flexible configuration concepts enables the CANlogger® to be adjusted quite flexibly to suit other tasks. Firmware and software can also be customized to meet the customer's requirements.
|SD-Interface||up to 32 GB|
|Inputs/Outputs||2x A-IN/1x D-OUT|
|Acceleration (x, y, z)||3|